Click image to view full size image
1. Space-saving: small in size, miniature and light weight..
2. Low cost and convenient: standardized profile, direct installation, and no other accessories.
3. Axial mount, radial mount and circuit board fitted, oil pipe unneeded.
4. For all kinds of stamping mould tool that produces metal or plastic products.
TECHNICAL SPEC:
Series | HC |
Oil Cylinder Bore | Φ20,Φ32,Φ40,Φ50,Φ63,Φ80, Φ100 |
Stroke | Special stroke can be customized |
Fluid | Filtered oil |
Operation Pressure | 5-140 KGf/cm |
Speed | 8-100mm/sec |
Temperature | -10°C~+80°C |
HCMF-SD/LA Dimension Table
| øMMaxle | female thread | male thread | WF | EF | SD axial mounting type | |||||
| øbore | A1 | KK1 | A2 | KK2 | E | RR | FD | ||||
| 20 | 12 | 10 | M8X1.25 | 15 | M8X1.0 | 8 | Ø8depth1.4bottom holeø3 | 45 | 30 | M5 | |
| 25 | 14 | 12 | M10X1.5 | 20 | M10X1.5 | 8 | Ø10depth1.4bottom holeø3 | 50 | 36 | M5 | |
| 32 | 20 | 15 | M12X1.75 | 25 | M16X1.5 | 10 | Ø12depth1.4bottom holeø5 | 62 | 47 | M6 | |
| 40 | 25 | 20 | M16X2 | 30 | M20X1.5 | 10 | Ø12depth1.4bottom holeø5 | 70 | 52 | M8 | |
| 50 | 30 | 25 | M20X2.5 | 35 | M24X1.5 | 11 | Ø15depth1.8bottom holeø6 | 80 | 58 | M10 | |
| 63 | 35 | 33 | M27X3 | 45 | M30X1.5 | 13 | Ø15depth1.8bottom holeø7 | 94 | 69 | M12 | |
| 80 | 40 | 33 | M30X3.5 | 55 | M36X1.5 | 17 | Ø15depth1.8bottom holeø7 | 114 | 86 | M14 | |
| 100 | 56 | 40 | M36X4 | 70 | M48X1.5 | 17 | Ø15depth1.8bottom holeø7 | 134 | 102 | M16 | |
| FL | FY | LA radial mounting type | N | Y | steel | aluminum | steel | aluminum | |||||||
| EA | EB | LH | TS | SS | HA | TX | TW | PL | PL | LL | LL | ||||
| 13 | 11 | - | - | - | - | - | - | - | - | - | - | - | - | 43 | 43 |
| 16 | 13 | - | - | - | - | - | - | - | - | - | - | - | - | 45 | 45 |
| 20 | 20 | 70 | 56 | 25 | 56 | 24 | M8 | 41 | 12 | 10 | 27 | 12 | 13 | 54 | 56 |
| 23 | 20 | 80 | 64 | 29 | 62 | 23 | M10 | 42 | 12 | 10 | 28 | 12 | 17 | 55 | 60 |
| 29 | 20 | 94 | 74 | 34 | 74 | 27 | M12 | 44 | 14 | 10 | 28 | 13 | 18 | 60 | 65 |
| 36 | 26 | 114 | 89 | 42 | 90 | 32 | M14 | 47 | 16 | 10 | 30 | 13 | 18 | 67 | 72 |
| 44 | 40 | 134 | 109 | 52 | 110 | 41 | M14 | 54 | 16 | 15 | 35 | 16 | 20 | 78 | 82 |
| 54 | 50 | 160 | 129 | 62 | 134 | 44 | M16 | 56 | 16 | 25 | 38 | 18 | - | 82 | - |
horizontal/vertical thin-type mini cylinder:back mainfold type
